One of the biggest pains with PCs is moving to a new hard disk. Not adding another disk, that's easy. I mean moving to a new hard disk altogether. Sure, there are plenty of drive imaging software packages out there that do a decent enough job, but you need to tie up a PC to do it. There are better alternatives available that are faster and do not require a PC. Doskologies Disk Jockey is one of those alternatives. I'd like to thank Tony at Diskology for providing the samples used in this review.
What You Get
Let's take a look at what comes in the Disk Jockey box, courtesy of the Disk Jockey product page on the Diskology web site:
Disk Jockey. What's in the box?
Disk Jockey (of course!)
Power cable and Power Supply
2 Electrostatic Mats to place your hard disks on
USB 2.0 Cable
Firewire (1394) Cable
Printed User Guide
Hours of hard disk bliss
Disk Jockey Specifications (for the nerd in you)
Interface : USB Rev 2.0/FireWire (S400)
USB Connection : Type B
FireWire : 6pin x2
Weight : 1.1lb
Dimensions : 2.5W x 5.6L x 1.65H in
Optimal Operating Temperature/Humidity : Temperature 41-95ºF Humidty 20-80% (Non-Condensing)
Firewire System Requirements
Windows Supported PC/Firewire Hardware
Virtually any desktop or laptop system with Firewire connection.
PCs that run versions of Windows OSs that support FireWire as a standard component.
Pentium300MHz with at least128MB RAM (we recommend the latest BIOS and device drivers be installed)
For any driver or bundled application installation a CD-ROM or floppy disk drive may be neccessary
Supported Windows Operating Systems
Windows 98SE, Windows 2000, Windows Me, Windows XP
Windows 3.1, Windows 95, Windows NT, Windows 98 Orignal Edition are not supported.
Macintosh Firewire Support
Virtually any Macintosh with a built-in or add-on PCI Firewire bus
Supported Mac OS Versions
Mac OS 9.1, Mac OS 9.2.1, Mac OS 9.2.2, Mac OS X (10.2 or higher)
Diskology can not guarantee that the Disk Jockey will work in all environments. Please contact support@diskology.com for questions concerning compatibility.
USB System Requirements
Windows
USB 2.0 Connection
USB 1.1 Connection (Data transfer limited to USB 1.1 specification)
Pentium 300MHz with at least 128MB RAM
For any driver or bundled application installation a CD-ROM or floppy disk drive may be neccessary
Supported Operating Systems
Windows 98SE/Windows Me/Windows 2000/Windows XP/Mac OS X
Unsupported USB Systems
Windows 95/Windows 3.x/Windows NT/Mac OS 9.x and earlier are not supported.
Computers that were sold prior to the release of Windows98 that have USB ports may not operate properly.
Some laptops featuring the AMD K6 CPU may not be supported at this time.
Diskology can not guarantee that the Disk Jockey will work in all environments. Please contact support@diskology.com for questions concerning compatibility.
LAN Addict is a Trademark ™ Morgan Humes and may not be reproduced, distributed, or copied in any way, in either digital format, print, or any other form. All trademarks on LAN Addict may not be owned by Morgan Humes and are Trademarks or Copyrights of their respectful owners. Webhosting sponsored in part by Lipweb.net.